The Silkland DP80 DisplayPort Cable review centers on a 1.6-foot VESA-certified DP 2.1 cable built for short connections between a graphics card and monitor.
Its 80Gbps bandwidth and broad resolution support make it a fit for demanding displays, provided both connected devices support the modes you want to use.
Silkland DP80 Cable Review Summary
The quick verdict

2,000+ ratings
Read Amazon ReviewsSilkland DP80 DisplayPort Cable
A 1.6-foot DisplayPort cable for nearby high-refresh gaming setups that can benefit from DP 2.1 bandwidth and supported DSC modes.
- VESA-certified DisplayPort 2.1 cable with 80Gbps bandwidth and male-to-male DisplayPort connectors.
- Lists uncompressed support for 4K at 240Hz, 8K at 60Hz and 2K at 540Hz; with DSC enabled, it lists up to 16K at 60Hz, 8K at 240Hz and 4K at 540Hz, 480Hz or 360Hz.
- Supports UHBR20, DSC 1.2a, VRR, FEC, ALLM, MST, Dynamic HDR10+, 3D and HDCP 2.3, as well as uncompressed multichannel audio pass-through.
- Backward compatible with DisplayPort 2.0 and 1.4; the manufacturer recommends DP 2.1 UHBR20 support on both the graphics card and monitor for the highest modes.
Pros
- 80Gbps bandwidth and a wide range of listed high-resolution, high-refresh modes.
- Short length suits a nearby PC-to-monitor connection with little slack.
Consider before buying
- The 1.6-foot length is restrictive if the computer and monitor are not close together.
- The highest listed modes depend on compatible graphics hardware, monitor support and, for some combinations, DSC.
Read the full review summary
The DP80 pairs a compact length with a high-bandwidth DP 2.1 connection. Its listed capabilities include uncompressed 4K at 240Hz, 8K at 60Hz and 2K at 540Hz, plus higher resolution and refresh combinations with DSC enabled.
Those are ceilings across compatible equipment, not guarantees that any particular PC and monitor will reach them together.
Its no-latch plugs, nylon exterior, triple shielding and tinned copper conductors address practical concerns around handling and signal interference. This is most compelling for a close desktop connection where extra cable length would add clutter.
Check the ports, supported DP mode, and required DSC settings on both devices before choosing it for a specific resolution and refresh rate.
The buying factors
Silkland DP80 Cable Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Bandwidth headroom
The 80Gbps DP 2.1 specification gives this cable substantial capacity for compatible high-resolution, high-refresh setups.
High-refresh flexibility
The listed modes span uncompressed 4K at 240Hz and 2K at 540Hz, with additional DSC combinations.
Build details
Triple shielding, tinned copper conductors and a nylon exterior are useful design features for a desktop cable.
Short-run convenience
At 1.6 feet, it suits equipment placed close together and helps avoid excess cable slack.
Setup versatility
Backward compatibility and support for VRR, MST and common gaming features add flexibility, subject to device support.
Value for its use case
Its advanced bandwidth is useful for demanding displays, though buyers with simpler setups may not need the extra capacity.
Key Features and Specifications of Silkland DP80 Cable
- VESA-certified DisplayPort 2.1 cable with 80Gbps bandwidth and male-to-male DisplayPort connectors.
- Lists uncompressed support for 4K at 240Hz, 8K at 60Hz and 2K at 540Hz; with DSC enabled, it lists up to 16K at 60Hz, 8K at 240Hz and 4K at 540Hz, 480Hz or 360Hz.
- Supports UHBR20, DSC 1.2a, VRR, FEC, ALLM, MST, Dynamic HDR10+, 3D and HDCP 2.3, as well as uncompressed multichannel audio pass-through.
- Backward compatible with DisplayPort 2.0 and 1.4; the manufacturer recommends DP 2.1 UHBR20 support on both the graphics card and monitor for the highest modes.
- Uses 28AWG tinned copper conductors, triple shielding, 24K gold-plated connectors and a nylon exterior; the plugs have no latch.
- The 1.6-foot cable is intended for indoor use and direct connections between DisplayPort-equipped computers and monitors.
Pros and Cons of Silkland DP80 Cable
Pros
- 80Gbps bandwidth and a wide range of listed high-resolution, high-refresh modes.
- Short length suits a nearby PC-to-monitor connection with little slack.
- No-latch connectors avoid a release mechanism that can complicate unplugging in a tight setup.
- Triple shielding and tinned copper conductors are designed to limit interference.
- Includes a 24-month service period and technical support.
Consider before buying
- The 1.6-foot length is restrictive if the computer and monitor are not close together.
- The highest listed modes depend on compatible graphics hardware, monitor support and, for some combinations, DSC.
- Its advanced bandwidth may be unnecessary for standard-resolution or lower-refresh displays.
Who Should Buy Silkland DP80 Cable?
Good fit
Consider the Silkland DP80 Cable if your computer and monitor sit close together and you want a short DP 2.1 connection for a high-refresh display.
Its 80Gbps rating and listed support for UHBR20 and DSC give compatible setups room to use demanding modes without buying a longer cable than the arrangement needs.
Before buying, confirm the monitor and graphics card support the specific resolution and refresh rate you plan to use, and check whether that combination requires DSC.
The cable's mode list describes what it supports in a compatible chain; the devices and their settings determine the operating mode.
The no-latch design and flexible nylon exterior may also suit a desktop where the cable is plugged and unplugged periodically.
If the short reach fits your layout, the combination of bandwidth and practical construction makes it a capable option for a premium DisplayPort setup.
Who should skip it
Skip this cable if your PC and display are farther apart than 1.6 feet allows; choose a length that reaches comfortably without pulling on the ports.
If your display uses HDMI rather than DisplayPort, or your setup does not need high refresh rates or high resolutions, first check whether a simpler connection meets your requirements.
How the Silkland DP80 Cable Fits a High-Refresh Setup
Bandwidth and display modes
The DP80's 80Gbps rating is aimed at high-end display combinations. The listed uncompressed modes cover 4K at 240Hz, 8K at 60Hz and 2K at 540Hz, while DSC expands the listed ceilings.
Buyers should match the intended mode to both ends of the connection, since a cable's bandwidth alone cannot set the monitor's available resolution or refresh rate.
A short run for a tidy desk
A 1.6-foot cable is useful when the PC is beside or directly beneath the monitor. That compact reach can keep a desk neater, but it leaves little room for routing around furniture or moving equipment.
Measure the route from port to port, including any turns, before choosing this length.
Build and connector handling
The cable combines tinned copper conductors, triple shielding, gold-plated connectors and a nylon exterior.
Those construction choices are intended to support a stable connection and withstand handling; they do not substitute for checking the cable's routing or ensuring the plugs are fully seated.
The connector has no latch, which may make unplugging simpler in confined spaces.
Compatibility and gaming features
Backward compatibility with DP 2.0 and 1.4 can help it fit into systems that do not use the newest DisplayPort mode.
Features including VRR, FEC, ALLM and MST may be useful in gaming or multi-monitor arrangements when the connected hardware supports them.
For multi-screen gaming, the product guidance recommends using the same cable type across displays, so check the full setup before mixing connections.
Alternatives to Silkland DP80 Cable
One useful comparison is included: it offers a longer reach with lower bandwidth, helping clarify the tradeoff between cable length and capacity.
Computer DisplayPort Cables alternative

7,000+ ratings
Read Amazon ReviewsSilkland 54Gbps DisplayPort 2.1 Cable, 10 ft
Choose the DP80 when the shorter reach fits and you want its higher bandwidth headroom.
The 10-foot, 54Gbps model is the more suitable choice when you need substantially more cable length and its listed modes cover your display's requirements.
- This 10-foot Silkland cable is rated at 54Gbps and lists 4K at up to 240Hz, 8K at 120Hz and 16K at 60Hz with DSC.
- It also supports DP 2.0 and earlier versions, DSC 1.2a, and includes a braided exterior.
- The DP80 is a 1.6-foot cable rated at 80Gbps, with listed support for uncompressed 4K at 240Hz and higher DSC-enabled combinations.
Is Silkland DP80 Cable Worth It?
The Silkland DP80 DisplayPort Cable is worth considering for a nearby monitor connection that calls for DP 2.1 bandwidth and high refresh support.
Its 1.6-foot reach, 80Gbps rating and detailed build features make it a focused option for compact gaming desks.
Confirm that both devices support the specific mode you need, especially for DSC-enabled combinations, and measure the cable route before ordering.
If the fit and compatibility check out, the DP80 offers strong capacity without excess cable; if you need a longer run or modest display modes, a different cable may suit your setup better.
Your review at a glance

2,000+ ratings
Read Amazon ReviewsSilkland DP80 DisplayPort Cable
A 1.6-foot DisplayPort cable for nearby high-refresh gaming setups that can benefit from DP 2.1 bandwidth and supported DSC modes.
- VESA-certified DisplayPort 2.1 cable with 80Gbps bandwidth and male-to-male DisplayPort connectors.
- Lists uncompressed support for 4K at 240Hz, 8K at 60Hz and 2K at 540Hz; with DSC enabled, it lists up to 16K at 60Hz, 8K at 240Hz and 4K at 540Hz, 480Hz or 360Hz.
- Supports UHBR20, DSC 1.2a, VRR, FEC, ALLM, MST, Dynamic HDR10+, 3D and HDCP 2.3, as well as uncompressed multichannel audio pass-through.
- Backward compatible with DisplayPort 2.0 and 1.4; the manufacturer recommends DP 2.1 UHBR20 support on both the graphics card and monitor for the highest modes.